POLYVINYLIDENE FLUORIDE (PVDF) RESINS
Model Type: FR900, FR904, FR905, FR921
| FR900 |
Polyvinylidene fluoride (PVDF) resins FR900 are fluorocarbon thermoplastics, with good thermal resistance, outstanding chemical resistance, high mechanical strength and toughness, high abrasion resistance, excellent weathering resistance, high dielectric strength, good stability under ultraviolet and nuclear irradiations, it has a wide range of service temperature (-50°C to +150°C). It can be dissolved in some polar solvents. FR900 can be easily processed by conventional methods, including compression molding, extrusion and injection, etc. The recommended processing temperature ranges from 190°C to 300°C.The resins would decompose at the temperature above 316°C, and therefore can be processed safely. As versatile engineering plastics, FR900 resins are widely used in chemical process equipment, electrical and electronic industry etc. |
Specification
Items |
Index |
||
FR901 |
FR902 |
FR903 |
|
Melt flow rate (g/10min) |
16 |
10 |
2 |
Melting point (°C) |
167 |
160 |
160 |
Tensile strength (MPa) |
40 |
44 |
35 |
Elongation (%) |
250 |
280 |
250 |
Density |
1.77 |
1.77 |
1.77 |
Hardness (Shore D) |
76 |
75 |
75 |
| Note: typical values |
Application
Grade |
Processing |
Application |
FR901 |
Injection |
Punp, valve, tubefitting and filling packing of tower |
FR902 |
Extrusion |
Rod, sheet, film, pipe and wire insulation etc. |
FR903 |
Molding |
Pump, valve, tubefitting and lining of equipments. |
Package and Storage
- FR901, FR902, FR903 are sealed with two layers of polyethylene sack, then packed in hard drum. The net weight is 20kg per unit.
- Store the product in clean, cool and dry warehouses to keep it from damp and moist.
- FR901, FR902, FR903 should be kept from high temperature above 350°C.
Exported Region
More than 30 countries across ASIA, Europe, America, Australia and Africa, etc
Product photo
To be provided upon requested
| FR904 |
| FR904 is used for casting films and Li-ion batteries. |
Specification
Items |
Index |
|
FR904-1 |
FR904-2 |
|
Solubility |
clear transparent solution |
|
Rotary viscosity, Pa·S (0.1g/mL DMAC) |
0.9 |
… |
Inherent, 102ml/g |
1.6 |
… |
Rotary viscosity,mPa·S(0.1g/g NMP) |
… |
2800 |
Melting point，°C |
160 |
|
Moisture ，%， |
0.10 |
|
| Note: typical values |
Application
Grade |
Processing |
FR904-1 |
casting films |
FR904-2 |
batteries |
Package and Storage
- FR904 are sealed with two layers of polyethylene sack, then packed in hard drum. The net weight is 20kg per unit.
- Store the product in clean, cool and dry warehouses to keep it from damp and moist.
- FR904 should be kept from high temperature above 350°C.
Exported Region
More than 30 countries across ASIA, Europe, America, Australia and Africa, etc
Product photo
To be provided upon requested
| FR905 |
| Polyvinylidene fluoride resin FR905 is the homogenous polymer of PVDF. It is specially used for casting Li-ion batteries. FR905 has high viscosity in certain solvent and can be easily produced films. The film has good thermal resistance, outstanding chemical resistance, high mechanical strength and good processing performance. |
Specification
Items |
Index |
Solubility |
clear transparent solution |
Rotary viscosity, mPa·s (0.1g/g NMP) |
3500 |
Melting point (°C) |
162 |
Moisture (%) |
0.04 |
| Note: typical values |
Package and Storage
- FR905 are sealed with two layers of polyethylene sack, and then packed in hard drum. The net weight is 20kg per unit.
- FR905 should be stored in clean, cool and dry warehouses to keep it from damp and moist.
- FR905 should be seemed as non-dangerous goods and avoid wetting and shocking when transported.
Exported Region
More than 30 countries across ASIA, Europe, America, Australia and Africa, etc
Product photo
To be provided upon requested
| FR921 |
PVDF FR921 is the base resin for baking-type fluorocarbon coating. It is composed of poly vinylidene fluoride with high molecular weight, and can keep stable at the high temperature up to 600oF(316°C). PVDF FR921 can be used as fluorocarbon coating, blending with special acrylic resin and other additives. Accelerated aging test (3000 hours) shows that coating based on PVDF FR921 has excellent anti-aging property and conforms to the AAMA standard. FR921 is also a good bonder that can be used in the lithium battery industry. |
Specification
Items |
Index |
|
FR921-1 |
FR921-2 |
|
Solubility |
…… |
clear transparent solution |
Rotary viscosity (mPa·s) |
…… |
1500 |
Particle (μm) |
50 |
…… |
Melt flow rate ( g/10min) |
2.0 |
|
S.S.G. |
1.77 |
|
Melting point (°C) |
158 |
|
Moisture (%) |
0.05 |
|
Thermal decomposition temperature (°C) |
470 |
|
| Note: typical values |
Grade |
Application |
FR921-1 |
coatings |
FR921-2 |
batteries |
Package and storage
- It is sealed with two layers of polyethylene sack, then packed in paper drum. The net weight is 20kg per unit.
- Store the product in clean, cool and dry warehouses to keep it from damp and moist.
- It is necessary to keep this product from the high temperature above 350°C.
Exported Region
More than 30 countries across ASIA, Europe, America, Australia and Africa, etc
Product photo
To be provided upon requested