PTFE GRANULAR RESINS
| FR101 - PTFE MOLDING POWDER RESIN |
| FR101 is designed for use in molding which is white granular PTFE resin, with excellent chemical stability, electrical property and low frictional coefficient. |
| Grade | Description | Application |
| FR101-1 | high | High |
| FR101-2 | general | General-molding |
| FR101-3 | semi-free | Small |
Specification
Items |
Index |
||
| FR101-1 | FR101-2 | FR101-3 | |
Tensile Strength (MPa) |
30.0 | 30.0 | 30.0 |
Elongation (%) |
370 | ||
Bulk Density (g/l) |
470 | 470 | 500 |
Average Particle Size (μm) |
140 | 160 | |
Moisture (%) |
0.03 | ||
Melting Point (°C) |
327 | ||
S.S.G. |
2.16 | ||
Thermal Instability Index |
10 | 20 | 20 |
Dielectric Strength (MV/m) |
100 | ...... | ...... |
| Note: typical values |
Package and Storage
- The product is packed in two layers of plastic bags, which is placed in damp-proof rigid paper drums, 25kgs net weight per drum.
- Stored in clean, cool and dry place to avoid possible contamination by dusts, moisture, etc.
- Exhaust ventilator is necessary when processing temperature is over 300°C. Processing temperature of this product must be below 390°C to avoid decomposition.
Exported Region
More than 30 countries across ASIA, Europe, America, Australia and Africa, etc
Product photo
To be provided upon requested
| FR102 - PELLETIZED FREE-FLOW PTFE RESIN |
Pelletized free-flow PTFE resin is a kind of white granular product. It has excellent fluidity, electrical properties, extremely chemical inertness and outstanding mechanical properties like low frictional coefficient. The product can be used for processing complicated articles. It also can be used for processing big sheets by compression molding, equal compression molding, automatic compression molding and exact extrusion. Pelletized free-flow PTFE resin is propitious for automatic processing that can shorten processing period and decrease compression molding processing cost. |
Specification
| Items | Index |
Bulk Density (g/l) |
800 |
Average particle Size (μm) |
480 |
Melting point (°C) |
327 |
Moisture (%) |
0.02 |
Powder Flow Index (S/100g) |
12 |
S.S.G. |
2.16 |
Hardness, Shard D |
55 |
Tensile Strength (MPa) |
26 |
Elongation At Break ( %) |
280 |
Shrinkage (%) |
3 |
Dielectric Strength (MV/m) |
70 |
| Note: typical values |
Package and Storage
- The product is packed in two layers of plastic bags, which is placed in damp-proof rigid paper drum, 25kgs net weight per drum.
- Stored in clean, cool and dry place to avoid possible contamination by dusts, moisture, etc.
- Exhaust ventilator is necessary when processing temperature is over 300°C. Processing temperature of this product must be below 390°C to avoid decomposition.
Exported Region
More than 30 countries across ASIA, Europe, America, Australia and Africa, etc
Product photo
To be provided upon requested
| FR103 - PTFE PRESINTERED RESIN |
FR103 is a white powder presintered PTFE resin, with good flowability, low frictional coefficient, good thermal stability and outstanding chemical inertness. Its melting point is 327°C. |
Specification
| Items | Index | |
| FR103-1 | FR103-2 | |
| Appearance | White resin pellet, no visible foreign matters. |
|
| Flow (S/100g) | 3.5 | 3.5 |
| Bulk Density (g/l) | 650 | 540 |
| Average Particle Size (μm) | 400 | |
| Moisture (%) | 0.03 | |
| Melting Point (°C) | 327 | |
| Note: typical values |
Application
The product is suitable for ram extrusion of pipes, rods and other PTFE products.
Package and Storage
- The product is packed in two layers of plastic bags, which is placed in damp-proof rigid paper drum, 25kgs net weight per drum.
- Stored in clean, cool and dry place to avoid possible contamination by dusts, moisture, etc.
- Exhaust ventilator is necessary when processing temperature is over 300°C. Processing temperature of this product must be below 390°C to avoid decomposition.
Exported Region
More than 30 countries across ASIA, Europe, America, Australia and Africa, etc
Product photo
To be provided upon requested
| FR104 - MOLDING PTFE FINE CUT GRANULAR RESIN |
| PTFE fine cut granular molding resin is a kind of white granular product. It has excellent electrical properties, extremely chemical inertness, and outstanding mechanical properties like low frictional coefficient. |
| Grade | Description | Application |
| FR104-1 | general | general |
| FR104-2 | general | filled |
| FR104-3 | electrical | skived |
| FR104-4 | high-performance | high-performance |
Specification
| Items | Index | |||
| FR104-1 | FR104-2 | FR104-3 | FR104-4 | |
Bulk Density (g/l) |
380 | |||
Average particle Size (μm) |
25 | 25 | 25 | 25 |
Moisture (%) |
0.02 | |||
Melting point (°C) |
327 | |||
Tensile Strength (MPa) |
35.0 | 35.0 | 32.0 | 35.0 |
Elongation At Break (%) |
440 | 450 | 450 | |
S.S.G. |
2.16 | |||
Thermal Instability Index |
20 | 20 | 10 | 20 |
Dielectric Strength (Mv/m) |
...... | ...... | 100 | ...... |
| Note: typical values |
Application
The product is used for processing varieties plates and rods.
Package and Storage
- The product is packed in two layers of plastic bags, which is placed in damp-proof rigid paper drum, 25kgs net weight per drum.
- Stored in clean, cool and dry place to avoid possible contamination by dusts, moisture, etc.
- Exhaust ventilator is necessary when processing temperature is over 300°C. Processing temperature of this product must be below 390°C to avoid decomposition.
Exported Region
More than 30 countries across ASIA, Europe, America, Australia and Africa, etc
Product photo
To be provided upon requested
FR105 - MOLDING PTFE FINE CUT GRANULAR RESIN |
PTFE fine cut granular molding resin is a kind of white granular product. It has excellent electrical properties, extremely chemical inertness, and outstanding mechanical properties like low frictional coefficient. |
Specification
Items |
Index |
FR105 |
|
Bulk Density (g/l) |
300~450 |
Average particle Size (μm) |
30±10 |
Moisture (%) |
0.03 |
Melting point (°C) |
327±5 |
Tensile Strength (MPa) |
≥35 |
Elongation At Break (%) |
≥350 |
S.S.G. |
2.13~2.17 |
Thermal Instability Index |
5 |
Package and Storage
- The product is packed in two layers of plastic bags, which is placed in damp-proof rigid paper drum, 25kgs net weight per drum.
- Stored in clean, cool and dry place to avoid possible contamination by dusts, moisture, etc.
- Exhaust ventilator is necessary when processing temperature is over 300°C. Processing temperature of this product must be below 390°C to avoid decomposition.
Exported Region
More than 30 countries across ASIA, Europe, America, Australia and Africa, etc
Product photo
To be provided upon requested